Great Britain official e-store
XADO Highway Atomic Metal Conditioner
Availability: In Stock

XADO Highway Atomic Metal Conditioner

XADO Highway Atomic Metal Conditioner is an engine treatment designed for use during every oil change. Highway rebuilds worn metal, reduces friction, and protects treated metal from future wear. Highway contains a much smaller amount of Revitalizant than our Maximum and Tuning products, and it is specially formulated for use during every oil change. Use Highway to rebuild worn metal, reduce friction between moving parts, lubricate metal, and protect an engine from future wear. Highway delivers 5.5% (RF5.5) of the active ingredient, Revitalizant, necessary for a complete revitalization cycle of a vehicle. It also contains a 2D lubricant and a Metal Conditioner. This three-stage process helps reduce friction, increase compression, enhance lubrication, and of course rebuild and protect worn metal. As such it is recommended for use after every oil change to revitalize and protect your engine from wear. Highway works in all gasoline-powered, diesel-powered, and natural-gas powered engines.

No matter how well a car is maintained, high heat and friction cause a car’s engine to become worn, scratched, and misshapen over time. Adding XADO Highway Atomic Metal Conditioner to your engine oil rebuilds worn engine metal and coats the rebuild metal at the friction points with a self-regulating layer of ceramic-metal to prevent future wear.

XADO’s innovative patented nano-technology is the result of 20 years of research and development. When added to an automobile’s engine oil, Revitalizant rebuilds engine metal at the atomic level, rebuilding worn engine metal, reversing wear, restoring engine geometry, and adding a self-regulating layer of ceramic-metal protection to prevent future wear. XADO Revitalizant does not cake, flake, or alter oil viscosity. This makes it safe to use in even the most sensitive vehicles. XADO’s Revitalizant technology has been independently tested and proven to work.

Revitalizant is unlike any other engine treatment, because it actually works to rebuild metal, targeting the source of engine wear instead of merely masking the symptoms. Revitalizant is activated by high heat and friction, so it only repairs metal at high-friction points where metal wear occurs. Revitalizant leaves crank-cases and non-friction metal unaffected. XADO Highway Atomic Metal Conditioner contains 5.5% of the Active ingredient necessary to Revitalize an automobile engine, so it is safe to use every oil change.

Choose product to view its image on the left
XADO Highway Atomic Metal Conditioner
Pack: Price:
£19.90
Prices without delivery

Application

Make sure automobile engine is warmed up to normal operating temperature. Turn off vehicle. Shake bottle for one minute and ensure bottle is at room temperature so that contents flow freely. Pour contents into engine oil reservoir. Start car and let engine idle for five minutes. Then drive as you normally would.

*Granules with atomic Revitalizant completely dissolve in motor oil at normal operating temperature.

Keep out of reach of children. Avoid contact with skin and eyes. If swallowed, seek medical attention immediately and show this container or label to medical personnel. Avoid release into the environment; refer to special instructions/ material safety data sheet.

Material safety data sheet is available for professional user on request.

Note

  • Can be combined with all types of motor oils, from full synthetic to mineral oils.
  • XADO Highway Atomic Metal Conditioner with revitalizant is effective for gasoline, LPG and diesel engines of passenger cars and small trucks with oil system up to 10 L.
  • Recommended to use during each oil change.
  • For a complete revitalization cycle it is recommended to use XADO Maximum 1 Stage (RF 100).
  • Compensates current wear-out of engine.
  • Increases engine compression.
  • Restores lost oil pressure.
  • Protects metal parts from overheating and overloading.
  • Improves lubricating properties of oil and tribological characteristics of engine units.
  • Reduces fuel consumption.
  • Increases power and acceleration capability.
  • Decreases noise and vibration level.
  • Can double or triple the life of engine.
  • Decreases toxic carbon monoxide and dioxide emissions.
  Bad            Good
captcha ->